If your wash would benefit from car wash blower systems, N/S Corporation has a large selection of quality blower systems to choose from. With multiple options and features to our products, you’re sure to find one that suits your car wash design. Browse our selection below.
- Attaches to most blowers
- Works with small compressor (eight gates req. 0.256 CFM)
- Structural Aluminum 75% Recycled
- Easy installation; bolt on design
- Reduces power consumption on idle by half
AF-303TC
A set of three 10 HP motor & producer blower systems. Includes:
- AF-1G straight blower frame with a 6″x 6″ aluminum structure
- Control panel
AF-505TC
A five 10 HP motor & producer blower system set, which includes:
- AF-2G slanted blower frame, 6″x 6″ aluminum structure
- Control panel
AIR-10-D
A driver side blower producer with 10 HP. Electrical controls not included.
- Standard driver side blue impeller / left hand discharge
- Counter clockwise rotation (when viewed from intake)
AIR-10-P A passenger side blower producer which operates at 10 HP. Electrical controls not included.
- Standard passenger side yellow impeller / right hand discharge
- Clockwise rotation (when viewed from intake)
AF-1G Blower Frame, A straight blower frame. 6″x 6″ aluminum structure.
- Standard 96″ clearance
- Optional powder coating
AF-2G Blower Frame, A slanted blower frame with 6″x 6″ aluminum structure. Same features as the AF-1G.
- Standard 96″ Clearance.
- Powder coating (Optional)
AAWF – Auto air wiper blower system. Includes:
- Two 7.5 HP motors with high pressure blowers
- One frame with 6 side air bags
- One frame with 2 top air bags
- Powder coating included
- UL approved electrical panel
AAWSB Auto Replacement Side Bag
AAWTB Auto Replacement Top Bag