Guide Rails

Guide rails are the key to keeping vehicles in the right place during a car wash. Standard rails incur severe wear and tear over time. Use guide rails from NS Corporation; they are durable and have withstood the test of time in hundreds of transit locations.

 A diagram of SCR-100 car wash guide rails

SCR-100 Car Wash Guide Rails

These rails with cleats facilitate safe entry for your customers. The SCR-100 is a galvanized steel guide system with standard heavy-duty protective plastic sleeves on its sides and cleats.

This package includes single, central, and middle cleats. These car wash rails stay 4 inches off the ground.

SCR-100Features:

  • 7½’ Entry safety curb rail
  • 2½” galvanized rail guide system with plastic sleeves on both sides & cleats
  • Section length of 5 feet plus a 2.5-foot entrance
  • Includes single, central, and middle cleats
  • Standard height: 4″

SCR-100-1 Features:

  • Center section safety curb rail
  • 2½” galvanized guide system with plastic sleeves on both sides & cleats
  • Additional 5-foot sections
  • Standard height: 4″
A diagram of SGR-200 car wash rails

SGR-200 Car Wash Rails

For another layer of protection, the SGR-200 utilizes a twin-rail containment system. Rather than only one exterior rail, this set puts a durable rail on each side of both tires.

This safety rail system offers further guidance and added protection, making it easier for vehicles to keep their tires straight as they pass through your car wash – which also benefits tire cleaning systems.

You can also purchase a full maintenance service contract through NS Corporation for more security and preventative maintenance.

SGR-200 Features:

  • 7½’ Entry safety guide rail
  • 2½” twin-rail tire containment system with plastic sleeves for outside rail, cleats
  • Length of 5 feet plus 2.5 foot entrance
  • Includes single, corner, and end cleats
  • Standard height: 4″

SGR-200-1 Features:

  • Center section safety guide rails
  • 2½” twin-rail tire containment system with plastic sleeves for outside rail, cleats
  • Additional 5-foot sections
  • Standard height: 4″

Depend on NS Corporation for High-Quality Car Wash Guide Rails

Does your business need superior car wash alignment tools and equipment? Contact NS Corporation, an established car wash equipment company with over 60 years of experience designing and building superior vehicle wash systems. You can depend on our time-tested and high-quality car wash equipment.

Contact Us