If your wash would benefit from car wash blower systems, N/S Corporation has a large selection of quality blower systems to choose from. With multiple options and features to our products, you’re sure to find one that suits your car wash design. Browse our selection below.
- Attaches to most blowers
- Works with small compressor (eight gates req. 0.256 CFM)
- Structural Aluminum 75% Recycled
- Easy installation; bolt on design
- Reduces power consumption on idle by half
![AF-303TC Airwiper for car wash blower systems](/content/uploads/2014/12/AF-303TC.png)
AF-303TC
A set of three 10 HP motor & producer blower systems. Includes:
- AF-1G straight blower frame with a 6″x 6″ aluminum structure
- Control panel
![A-505TC Car wash blower systems](/content/uploads/2014/12/A-505TC.png)
AF-505TC
A five 10 HP motor & producer blower system set, which includes:
- AF-2G slanted blower frame, 6″x 6″ aluminum structure
- Control panel
![Airforce Blower_Driver Car wash blower systems](/content/uploads/2014/12/Airforce-Blower_Driver1.png)
AIR-10-D
A driver side blower producer with 10 HP. Electrical controls not included.
- Standard driver side blue impeller / left hand discharge
- Counter clockwise rotation (when viewed from intake)
![Airforce Blower_Passenger_yellow Car wash blower systems](/content/uploads/2014/12/Airforce-Blower_Passenger_yellow1.png)
AIR-10-P A passenger side blower producer which operates at 10 HP. Electrical controls not included.
- Standard passenger side yellow impeller / right hand discharge
- Clockwise rotation (when viewed from intake)
![AirForce_Straight Frame_300pixel Straight frame for car wash blower systems](/content/uploads/2014/12/AirForce_Straight-Frame_300pixel.png)
AF-1G Blower Frame, A straight blower frame. 6″x 6″ aluminum structure.
- Standard 96″ clearance
- Optional powder coating
![AirForce_Slanted Frame_300pixel Slanted frame for car wash blower systems](/content/uploads/2014/12/AirForce_Slanted-Frame_300pixel.png)
AF-2G Blower Frame, A slanted blower frame with 6″x 6″ aluminum structure. Same features as the AF-1G.
- Standard 96″ Clearance.
- Powder coating (Optional)
![AirWipers_300pixel Airwiper for car wash blower systems](/content/uploads/2014/12/AirWipers_300pixel.png)
AAWF – Auto air wiper blower system. Includes:
- Two 7.5 HP motors with high pressure blowers
- One frame with 6 side air bags
- One frame with 2 top air bags
- Powder coating included
- UL approved electrical panel
![Air Wiper_Side Bag_300pixel Airwiper for car wash blower systems](/content/uploads/2014/12/Air-Wiper_Side-Bag_300pixel.png)
AAWSB Auto Replacement Side Bag
![AirWipers_Top Bag_300pixel Airwiper for car wash blower systems](/content/uploads/2014/12/AirWipers_Top-Bag_300pixel.png)
AAWTB Auto Replacement Top Bag