Guide Rails

Car wash guide rails are the key to keeping vehicles in exactly the right place during the wash. The rails can occur serious wear and tear over time, use guide rails from N/S, they are durable and have withstood the test of time in hundreds of transit locations.

SCR-100

This unit facilitates safe entry for your customers. The galvanized steel guide system comes standard with heavy-duty protective plastic sleeves on the sides and cleats. The package includes single, central, and middle cleats, and the rails stay 4 inches off the ground.

Image coming soon

SCR-100 7½’ Entry safety curb rail, 2½” Galvanized guide system with plastic sleeves on both sides & cleats, Section length of 5 feet plus 2.5 foot entrance. Includes single, central and middle cleats. Standard height: 4″.

Image coming soon

SCR-100-1 Center sections safety curb rail, 2½” Galvanized guide system with plastic sleeves on both sides & cleats, additional 5 foot sections. Standard height: 4″.

SCR-200

For another layer of protection, the SCR-200 car wash guide rails provide a twin rail containment system. Rather than only one exterior rail, this set puts a rail on each side of both tires. This offers further guidance and more protection, while making it easier for drivers to keep their tires straight as they pass through the car wash. You can also purchase a full maintenance service contract through N/S Corporation for more security and preventative maintenance.

Image coming soon

SGR-200 7½’ Entry safety guide rail, 2½” twin rail tire containment system with plastic sleeves for outside rail, cleats, length of 5 feet plus 2.5 foot entrance. Includes single, corner and end cleats. Standard height: 4″.

Image coming soon

SGR-200-1 Center sections safety guide rail, 2½” twin rail tire containment system with plastic sleeves for outside rail, cleats, additional 5 foot sections. Standard height: 4″.